Step 1. Use the Wire Worker with small metal mandrel to form a 1” coil with each Red and Blue wire. Cut into approximately 1/4” sections.

Step 2. Cut 11/2” pieces of Red, Blue and Silver wire. You will need 12-15 pieces per firecracker (coil).

Step 3. For each firecracker, dip two 11/2” pieces into 1/4” of Fabri-Tac and insert into coil so the bottom of the inserted wires are flush with the bottom of the coil. Continue process until you can’t fit any more pieces. Allow to dry.

Step 4. Once firecrackers are dry, spread out individual wires, bending and trimming as desired. Flatten the coil slightly with Nylon Jaw Pliers so that it will lie flatter on the card. Color the base with Red or Blue Sharpie so that it matches the coil.

Step 5. Cut the following papers: White Glossy cardstock: 6 x 12” pc folded in half for 6 x 6” card; 51/4” square with Zig Zag edges Blue cardstock: 5 7/8” square. Red Star cardstock: 5 5/8” square

Step 6. On White 51/4” square, stamp desired words in Silver ink and emboss with Silver powder.

Step 7. Fill up the rest of the White square by stamping stars with White Ink and emboss with White Sparkle Powder.

Step 8. Adhere all layers to card with paper adhesive.

Step 9. Glue wire firecrackers on top layer with Fabri-Tac