Instructions:

Step 1. Cut piece of white cardboard approximately 5" x 7”.

Step 2. Using foam applicators, swirl the three colors of Chalk Inkpads onto white cardboard, covering the entire piece.

Step 3. Using the darkest color of Chalk Ink, stamp swirls randomly on colored cardboard. Step 4. Cut cardboard into ½” squares (69), and color edges with ink using foam applicator.

Step 5. Cut 23 of the ½” squares in half diagonally and color the cut edge with ink using foam applicator.

Step 6. Attach wire swirl to center of squares with small adhesive Zots.

Step 7. Apply two coats of Glossy Accents to all of the squares and triangle pieces. Allow to dry between coats.

Step 8. Cut black board into 5" x 7” piece with a 2½" x 4½” opening.

Step 9. Lay your glossy tiles on the frame, making sure it fits properly. Glue tiles on frame (following photo for placement) by applying a generous amount of Glossy Accents to a section of the frame at a time and pressing down each tile so that some of the Glossy Accents oozes out the sides (to simulate grout).  Continue this process around the entire frame.  If you have missed any areas with Glossy Accents, simply go back and add extra.

Step 10. Allow frame to dry several hours, and then adhere to acrylic frame with red line tape.

Step 11. Insert desired photo in frame.

Tile Detail