22
Gauge Non-Tarnish Silver
26 Gauge Non-Tarnish Silver
Pre-Formed Wire Swirls
Artistic Wire™
Halloween Page
designed by Lauren Johnston
Nylon Jaw Pliers
Wire Cutter
1. Print photos onto transparency film and cut horizontally so two photos are still attached.
2. Matte transparent photos with light gray cardstock whose edges have been rubbed with Red Mica Magic ink first.
3. Matte with Black cardstock – trim top & bottom edges with pinking shears.
4. Punch three 1/8” holes in center between photos and insert eyelets. Punch three holes with micro punch on each outer edge and insert mini brads. Apply foam tape to the center back of each photo strip (avoiding the eyelets), with two layers on each side of the eyelets in the center, one layer next to that, and super tape on the outside edges.
5. Cut two black strips 1 ½” x 12” and punch 16 holes along each edge with 1/8” hole
punch – insert eyelets into these holes.
6. Wire X’s with 22 gauge non tarnish silver. Apply foam tape to the back and matte with red strips of cardstock 1 ¾ x 12”.
7. Cut out desired letters and numbers from silver paper using Rat-A-Tat dies and adhere to black cardstock 1½” x desired length. Punch three 1/8” holes on each side of letter/date strip and insert eyelets. Wrap with 26 gauge non-tarnish silver, using eyelet holes for starting and ending points. Apply foam tape to the back and matte with red cardstock.
8. For “Halloween” piece, matte again with silver paper and black cardstock.
9. Attach wired strips to each side of page.
10. Attach Magic Mesh down the center of the page.
11. Follow photo placement for the rest of the items.
12. Attach wire swirls next to the date with Mini Zots.
Transparency
Film
12x12 Cardstock:
Black
Light Gray
Red
Decorative Paper
12x12 Silver Cardstock
Silver Paper
Pinking Shears
ColorBox® Red Mica Magic Pigment Pad
Hole Punches: 1/16”, 1/8”
Mini Silver Eyelets
Eyelet Setter
Mini Silver Brads
Sizzlits Die Cuts: Rat-A-Tat
Black Magic Mesh
Therm O Web: Mini Dots Super Tape
Double Sided Foam Tape
Scissors
Ruler
