Fold over the ends of the Artistic Wire Mesh and add one C-Crimp Cord End to each end of the wire mesh.
Attach ½ of the clasp to one of the 3” pieces of
Polyester Chain using 2 black 18g 15/64” jump rings.
Repeat step 2 using the 2nd
piece of Polyester Chain and the other 2 black 18g 15/64” jump rings.
Attach the other ends of
the Polyester Chain to the 2 Round Hematite Wrappers using (2 each) 4 black 18g
15/64” jump rings.
open 18g 5/32” black jump ring add 2 pre-closed 18g 5/32” black jump rings, 1
of the Round Hematite Wrappers, & one end of the wire mesh. Close the jump
ring. If you like you can add the
wire mesh after you have completed the byzantine & möbius section.
Make 1 segment of Byzantine
as found in my booklet “Basic
& Advanced of Chain Maille” using black 18g 5/32” jump rings. One segment of byzantine is “2 rings, 2
rings, flip, 2 rings, 2 rings, 2 rings, flip”.
Add a large möbius to the
chain by taking an open brass 18g 15/64” jump ring and scooping up the
byzantine segment added in step 6.
Close the brass jump ring.
To complete the möbius take a second open brass 18g 15/64” jump ring and scoop up the same byzantine segment before closing the jump ring go through the large brass 18g 15/64” jump ring. Close the brass jump ring.
Add another segment of
byzantine, add a möbius, add a segment of byzantine, add a möbius, continue
this pattern for a total of 16 byzantine segments and 14 möbius. End with a byzantine segment. Add 2 black 18g 5/32” jump rings to the
last byzantine segment.
Twist the wire mesh around
the byzantine & möbius section.
With a black 18g 15/64” jump ring connect the wire mesh, the byzantine
segment, & the second Round Hematite Wrapper. Pull gently on the sides of the wire mesh to “fluff” it up.
Optional: Using the gold wire mesh tie a bow around one of the jump rings that connect the chains together.