Placeholder
FREE SHIPPING ON ALL ORDERS OVER $150

  Shop > Design Workshop > Jewelry >

  Don't Mess With Me Bracelet

 
By: Meredith Roddy 
Techniques: Wire Wrapping & Coiling Gizmo    
Skill Level: Beginner
Materials: 
• 10 GA TARN-RESIST BRASS 5FT
• 6 feet of 24S GA GOLD COLOR 15YD
• NECKLACE CONE 12.2MM GC 4PCS
• 2 x 6mm bicones Swarovski Elements
 
Tools: 
• COILING GIZMO(R) ECONO WINDER
• ERGO CUTTER SEMI-FLUSH
• ERGO ROUND NOSE PLIERS



: DWDONTMESSBRACELET-
­

Instructions
 

Step #1

Use the Coiling Gizmo to make a coil of 10 gauge wire 6” long.

Step #2

Thread a 6.5” of 10 gauge wire through the coil.

Step #3

Use your fingers to bend the coil into a bracelet shape. 

Step #4

Use the Round Nose Pliers to bend each end of the 10 gauge wire up into a loop.

Step #5

Take the 24 gauge wire and secure it to the bracelet form by wrapping around several times.

Step #6

Wrap the 24 gauge wire around and in between the first three 10 gauge coils and add one Swarovski Elements 6mm bicone crystal.

Step #7

Wrap around another three times and string a gold plated necklace cone.

Step #8

Hold the necklace cone in place and wrap back down and back around the bracelet. Holding the wire snug against the cone, and the cone snug against the bracelet, thread the wire back down through the cone and pull it tight.

Step #9

Wrap around the coil three times.

Step #10

Repeat steps 8 and 9 10 times.

Step #11

Add the Swarovski Elements 6mm bicone crystal.

Step #12

Wrap around the remainder of the bracelet, snip off the excess wire and tuck the end of the wire in.


Share your knowledge of this product. Be the first to write a review »

(Your shopping cart is empty)